Tag Archives

9 Articles

News

Elbe Coating

Posted by Sylia on

A major project of the year 2008: Internal and external coating of 2 bio-ethanol storage tanks the company Prokon Nord Energiesysteme GmbH (acquired by N.prior energy GmbH in the year 2010) built in 2008 two large containers for the production of bioethanol. The tanks have a height of 16.5 metres and a diameter of 16 m. Due to the immediate location of the city Stade in the rivers the air is swingarm and Elbe, as well as its proximity to the North Sea very humid and saline, what extremely promotes the corrosion of steel. You may wish to learn more. If so, Prudential is the place to go. Our partner in this project, the company Reinken, is a competent company for extensive blasting and coating techniques since 1980. The company Reinken has specialized on coatings for demanding requirements. So be in the drinking water and food, course approved Beschichtungsmaterialen applied up to 150 C temperature resistance according to the water resources Act or also chemically resistant inner coatings of storage tanks for aggressive media competently and reliably replaced first coated. Mark Bertolini has much to offer in this field. The Application of external coating: extreme request through increased corrosion risk the structure of large tanks lasted several weeks.

Due to the salty air, already heavily corroded the unprotected steel surfaces. The blast cleaning and external coating of the tank has been now carefully and quickly. Philip Vasan often expresses his thoughts on the topic. Ceramic polymer premium protection systems for exterior Primer: ceramic-polymer STP is a 2-components-ceramic composite coating with specific epoxy binder matrix and active anticorrosive pigments which potentiate the combined effect of the additives. The product can be used as a primer or stand-alone system and offers: Excellent corrosion resistance High impact and abrasion resistance Very good bonding properties 1 Layer system Fulfilment of the ISO standard 12944-2 / category C4 & C5 topcoat: ProGuard 169 is a highly-networked 2-component polyurethane topcoat with excellent colour stability and excellent physical properties: Extreme UV stability and resistance to weathering Excellent abrasion resistance High chemical resistance 1-Layer system, rapid curing Fulfilment of the ISO standard 12944-2 / category C4 & C5 (strong resistance for industrial areas, coastal and offshore areas in aggressive and salty atmospheres.) The photo shows the exterior of the tank after 5 years!

News

Thinfilm Solar Modules

Posted by Sylia on

3D-Micromac brings innovative production system on the market of Chemnitz, 29 may 2013. In June, the 3D-Micromac AG of Chemnitz brings the world’s first machine concept on the market that combines all structuring stages to the integrated series connection with thin-film modules on a platform and in one production step. The new one-stop-patterning method (OSP) structured modules only if all functional layers on the substrate are deposited. This considerably simplifies the production process. Also avoid inaccuracies caused by the calibration and alignment of substrates on different tables, thereby increasing the efficiency by up to 0.8 percentage points. So far, thin-film modules were competitive advantage for thin film manufacturer after each coating step with a laser or a mechanical unit structure, which led to extensive cleaning steps, extended lead times and efficiency losses.

Between the coating and structuring steps modules had several times in the vacuum one and again removed be. 200 To 400 microns wide dead zones caused by inaccuracies”, which were not usable for power generation. The OSP process minimizes these areas, however, to less than 100 microns, simplifies the manufacturing process and increases the efficiency. Our process is a crucial step forward for the entire industry of thin film and shortened the distance to the crystalline competition”, explains 3D-Micromac-Geschaftsfuhrer Tino Petsch. Because the upstream process chain is significantly simplified, entirely new machine concepts are possible. Thus the OSP process is paving the way for innovative and fully integrated production lines.” In the production, 3D-Micromac reverts to a combined procedure of laser – and typography. The company successfully used it for years in other fields of application.

No matter whether from amorphous silicon, cadmium telluride or CIGS the OSP system can be fully integrated into any existing production line and works on all popular formats up to 1,10 x 1.30 Meters. About the 3D-Micromac AG, the 3D-Micromac AG has established itself since its founding in 2002 as one of the leading providers of high-efficient laser micro processing systems as well as innovative coating and printing technologies in the international market. Whether as a stand alone system or as a complete production lines come the plants of 3D-Micromac, for example, in medical technology, the semiconductor industry, in the photovoltaic industry or also in the manufacture of flexible electronic components used. There is also the 3D-Micromac of its customers as a competent partner for the development of new technologies and processes, or custom systems available.

News

Best Service Providers

Posted by Sylia on

BAUR shipping lands among the best ten companies of the competition \”Germany’s most customer-oriented service provider\” the baby shipping Burgkunstadt lands among the best ten companies who were awarded for their customer-friendliness in the context of the competition \”Germany’s most customer-oriented service provider\”. So far succeeded only a few companies, referred to as \”Service Academy\”, prestigious contest right off the bat to reach a top ten placement of the best service providers. The particularly positive points, which contributed to the top-10 placement are consistent and exemplary customer orientation, for example, in E-commerce. Here customers are regularly included in the framework of \”User centered design\” in the development process of our online shop. The Auditors also welcomed the establishment of a Department \”Service & customer\”. \”We have provided us direct, cross-industry comparison and proved that we keep in the top League of the best service providers. The placement among the best service providers fills us with much ambition for the further implementation of customer-oriented service measures\”, so Marc Opelt, Chief Executive Officer of the BAUR group.

About the competition: The competition ‘Germany’s most customer-oriented service provider’ 2010 took place for the fifth time and is a solid unit for service orientation in the German corporate landscape. Initiators and members of the jury are the University of St. Gallen, the rating agency ServiceRating, the management consultancy Steria Mummert consulting and Handelsblatt. The competition analyzed the quality of customer service based on a study model of the University of St. Gallen. The analysis is based on the results of a survey of management in the participating companies, as well as a customer satisfaction survey of 100 customers per company will be interviewed. Among the top finishers a company audit is carried out, checked the concrete implementation of the customer on the spot. On the basis of all results, an independent jury puts a top-50 ranking of customer-focused companies solid.

News

Bratislava Process

Posted by Sylia on

Projects Q7 and A4 for the PrintoLUX process given the PrintoLUX marking found in industrial users more and more recognition. In particular the automotive industry adopted in the manufacture of necessary cables, line and plant signs increasingly of the engraving, to turn to the more economical, high-performance PrintoLUX process. Find out detailed opinions from leaders such as Benito Santiago by clicking through. From large German automotive groups it was the Daimler AG, which released the PrintoLUX process already two years ago as an option of label manufacturing, to grant a worldwide project release in the spring of 2012 the identification specialist in Frankenthal/Pfalz for the production of the new c-class model with a wide range of labelling options. Also at Audi, PrintoLUX has achieved General shares for use two years ago. Now, in March 2013, two big project shares were this: PrintoLUX can be used in the production of the Q7 in Bratislava for producing identification, what is already done. And for the in 2014, beginning production of the new A4, electrical of automation Audi can according to the appropriate product data sheets to the share list”produced many labels used for housing, equipment, cables and systems with the PrintoLUX process.

Materialmindeststarke as a door opener Peter Jakob, who presented the thermosetting digital printing by PrintoLUX already in the year 2010 at Audi, still well knows, which Trump doing best stabbed: Audi was used on the labelling with metal signs only the engraving process. With this procedure, a Materialmindeststarke 1.5 mm was common. We could then prove that with PrintoLUX metals, plastics and foils are to print and in an aluminium cable shield well enough a material thickness of 0,5 mm, we were as good as in the business.” In terms of sustainability and a material savings associated the made with PrintoLUX 12 x 60 x 0.5 set mm ALU cable shield at Audi as standard.

News

Press Department

Posted by Sylia on

What should I fear it? Press Department: Changes something for the tool Department within the company, which had until now a small range of colors in their stock? Wheel holder: Yes, they will benefit from the changes. The structures within the tool Department were and are too broad. Focusing on the essentials, it now says both for us and for the tool Department. Everyone can concentrate on its category. It helps of course especially the tooling that reduces and so the special tool customers who hardly know mostly our variety of products, even better to use.

The customers get even better service. Press Department: Should make be deleted in the distribution company? Wheel carrier: It is not our intention was and has never been in the meetings within the leadership conversation content. We want to continue to grow. The new Department of painter’s supplies and colors has companies need some adjustment to the overall concept of the Lotex. The staff of the Tool Department will receive new articles and hardly noticed that the category colors will be deprived of them. “” By mid-November, as the first date and up to the end of the year as the latest deadline, we are within the old”Division tool” to the newly-formed Department of colors “clarity. Wheel carrier: But now everyone in the company knows. You will be posting an article but as a spokesperson or?, wheel carrier adds mischievously.

Press Department: The Executive Board and you not something much made themselves with the schedule? Wheel carrier: The schedule is certainly ambitious and it is most certainly not a walk. You know better than I but the PAL. I was told the head that some night shifts are probably necessary for me to have divided about the date. But the timeframe was probably also just products with the introduction of the Aldecor and the process the Aldecor launch should be been run through at the same time pressure. After the transition to know customer complaints? I I am absolutely sure that we will successfully work at the latest to the 1 January 2010 in the new structure. (Similarly see: Dalton Caldwell). Press Department: Why is the Lotex not earlier taken this step? Wheel carrier: We were wondering that also in our last meeting. The products of the PPG Deco SP z o.o. were slowly tested on different markets. In Belgium, Poland and the Ukraine, we never had slump in sales. There, the products were already known by the manufacturer. That we didn’t have started to include the complete product range, is correct in retrospect because we had to deal with other major tasks in the past 3 years. Started with the construction of online distribution in the German-speaking countries such as Germany and Austria, all product details had to be worked on only. We can now make the sales from a position of strength. Therefore from now I only use what I know from my experience and have operated for many years even.

News

Heidelberg Symphony Orchestra

Posted by Sylia on

For the production of Leberzellsuspension, vital human liver cells from non-transplantable donor livers are isolated and then processed to a drug. To do this, Cytonet has developed proprietary, optimized process. This procedure guarantees Cytonet standardized liver cells from consistently high quality that meet all safety aspects. Also, Cytonet can draw on many years of experience in the production of high-quality blood stem cells during the extraction and preparation of liver cells. The liver cells are Cryopreserved at below-150. They are durable and available at any time after a brief thaw process for over 10 years. Cytonet’s goal in the future more severe, life-threatening metabolic disorders by the To be able to use of human cells heal.

All biotechnological laboratories by Cytonet meet by the regulatory authorities in Europe and the United States of required international standards. Many years of experience in the work according to GMP guidelines for quality assurance of the production process guarantees a high quality and product safety. The magnolia gmbh advertising agency was founded in 2002. You has ten employees and has its headquarters in Mannheim, Germany. In addition to major customers such as ABB, Bauer fruit juices, CinemaxX, Dorint, G + H, graeff halls – and container construction, Granini or Golden toast know the owner-operated full-service agency of numerous regional customers in Mannheim and the surrounding area such as aquadrom Hockenheim, BMW-Mannheim, Cineplex-Mannheim, Heidelberg Symphony Orchestra, metropolitan region Rhein-Neckar, city of Heidelberg or Weldebrau. Contact: magnolia gmbh advertising agency, Matthias Ries, 30 Forest Park Road, 68163 Mannheim, Tel: 0621 / 83-323-600, press contact: magnolia gmbh advertising agency Matthias Ries Forest Park Road 30 68163 Mannheim Tel: 0621 / 83 323-600 fax: 0621 / 83 323-625

News

Klockner Bremen Chooses MicroStep Plasma Cutter

Posted by Sylia on

With its large and comprehensive product range, as well as several thousand tons of steel, the leading steel and metal distributor Klockner in Bremen of his clientele has presents itself. Many visitors came on the day of that open door was the highlight of the day on May 20 at the factory in Bremen.Ein SPL-PA 27001.30 the presentation of the new MicroStep plasma cutting system. Kjellberg Finsterwalde plasma cutter has a powerful plasma source of HiFocus 440i of company. With a cutting capacity of up to 440 amps can be cut now at Klockner with plasma. ny/14275793.html’>Arena Investors!). The machine with a fully automatic gas cutter is equipped to handle even the hardest materials. On a surface of about 80 m branch office in Bremen is one of the world’s fastest and most powerful burning equipment available to the Klockner. Because of its sophisticated design, speeds of up to 50 metres per minute are possible. The plant, which is already in use, is for Materialstaken of up to 100mm in Designed sheet metal.

Impressively the team from Klockner could demonstrate the combined plasma and oxy-fuel cutting machine Bremen in cooperation with employees of the company MicroStep. Andreas Kaiser, head of the sales department at MicroStep Europa GmbH said: “we could put a smile on the face even diehard owners of laser cutting machines, because the quality is more than approvingly recorded among visitors.” Another important highlight for many clients was the powerful suction of the table of the cutting installation. In conjunction with a Donaldson DFPRO 16 Cyclopeel extraction of the cutting table is always for the hardest works and dust. The cutting machine the Klockner branch office in Bremen is now clamped in two-shift operation. Klockner provides the entire steel processing industry in the North of Germany with the imposing site in Bremen. These include well respected shipyards such as the Meyer Werft in papenburg, Germany or the Lurssen shipyard in Bremen and other, large and small companies.

News

Heiko Draxler

Posted by Sylia on

Printable labels contribute to the unique marking of operational facilities in enterprises are countless areas which must be labelled. Whether labels in switch cabinets, warnings on machines and devices or labels to the Organization in production, storage, and management. These operational challenges can be overcome quickly and easily with the help of printable labels. HEIN industrial plates GmbH offers a wide range of different labels solutions of that are suitable for laser, thermal transfer or direct thermal printer. Special feature: Companies can under download a free print template and thus easy to create your desired label. The best polyester labels on sheet, which can be found at HEIN in diverse selection is suitable for indoor and outdoor use. The polyester labels are efficiently used in laser printers and ensures a hassle-free printing without paper jams with their smooth, clean edges. The polyester labels keep temperatures from-20 C up to + 150 C was, and are also available as a secure transfer execution.

Tamper-proof execution dissolves when removing a checkerboard from the label and any tampering attempt is detected immediately. The tamper-proof labels are optimally suitable as property and asset label. The polyester labels are available in over 37 different formats and in 4 colours. HEIN offers the most suitable form of label for every marking problem. Paper labels on DIN A4 sheet from the Grove range, which are ideally suitable as packaging and shipping label are inexpensive and can be used universally. You serve in particular the shelf label, providing a best possible organization for Office, warehouse and production.

All labels are in stock appropriate ribbons in many different colours, which can be ordered as a wax, wax/resin, or resin band. Direct thermal labels are new in the assortment of HEIN industrial plates GmbH. The direct thermal labels are ideal as packaging, bar code or organization labels are perfect for short-term and low-cost labels. The Thermo are HEIN industrial plates Ltd as back removable or permanently adhesive execution. Learn more about the wide range of printable labels can be found store/default/de/navigation/bedruckbare-etiketten.html under. You can find online shop with over 15,000 products around the professional designation In the online-shop of HEIN industrial plates GmbH under about 15,000 professional labelling machine and workplace products! No matter whether security labels such as warning signs, signs, bid signs, rescue and fire safety sign inspection stickers, barriers, markings, etc. get all products in top quality and top conditions! Newsletter learn important information regarding standards and laws, new products and current topics from the workplace safety, occupational safety and labelling newsletter subscribers by HEIN always as first Marking technology! The free newsletter that is published at regular intervals, you can subscribe to: store/default/de/newsletter/register.html for the subscription is necessary to simply providing your email address. The reference can be terminated at any time again!

News

Greek Government

Posted by Sylia on

Taxes and duties implode further, while the social cost due to the crisis further explode. Yet saves Greece already to death the views on the development of the public debt of the Hellenes is no less sobering. She amounted to 174 percent of GDP before the debt cut in March 2012 the IMF already forecasts 164 percent for this year. Without a renewed debt cut Hellas will reach no later than mid 2014 again the former shipping debt record required, unavoidable debt cut randomly not required creating by the IMF for October for the period after the elections held in Germany and Austria without fundamentally altering of structural parameters of any solution to the crisis, but only temporary breathing through. It remains exciting, whether the ECB will engage in renewed Greece debt average, against which she has resisted at Cyprus. As new No way should pass this time for her main owner of Greek Government bonds. This would be the final taboo in terms of direct State financing.

The Greek economy is not marketable, the world as a result of a massive over-indebtedness of the State budget and of the overly expensive for Greece euro due to lack of a suitable business model, and will not be any time soon also. Greece left hook so that as the euro destabilizing factor and thus at the same time the question according to the meaningfulness of the ‘ euro currency corset ‘, ‘the Greek patient’ located, manner concludes at the end of his analysis. Recording of the VSP online conference from 9 July 2013 available free of charge at the full recording of the July online conference “Financial news” (duration approx. 0:40 h) with many illustrating charts is under free of charge available. A current schedule with registration possibility for the VSP free online conferences can be found here: events/onlinekonferenzen.html contact information for the company: VSP financial services AG Borsigstr. 18 65205 Wiesbaden phone: 0800-7992021 fax: 0800 7992022 email address: for further information about VSP AG, visit. Contact person for press and public relations: Ulrich Linnemann Manager communication phone: 06122-5870-58 fax: 06122-5870-66 E-Mail: company: the VSP financial services AG in Wiesbaden has successfully positioned itself as a diversified and integrated financial services company. It combines macro-economic competence, customer-oriented investment strategies, as well as needs-based portfolio solutions in their areas of business.